If you browse to the parent directory of the linked images, you'll see the appropriate US, EU, or IL. The images in the table above are for “rest of world” routers. Note that if your router says US, EU, or IL on the sticker on the bottom, you might need a different image than the image linked in the tables above. Please check the file name.įor TP-Link Archer C7 v2.0, it is enough just to rename the factory image to something like factory.bin, then just upload it via the OEM web interface like a firmware upgrade. Upgrade unsuccessfully because the version of the upgraded file was incorrect. Once trying to flash OpenWrt you will encounter the following error: TP-Link are checking for the file signature in order to verify it. (Updated and tested on March 2017 by orenr) SQM is commonly known as “bufferbloat management” or “ QoS” and is often very valuable on consumer lines. Software flow offloading + SQM (upload)Įnabling wireless, running additional applications, or even imperfect ISP lines can significantly limit “real world” performance to well below these values. Software flow offloading + SQM (download) Qualcomm Atheros QCA9558, Qualcomm Atheros QCA9880ĭefault routing + SQM (download)ĭefault routing + SQM (upload) Qualcomm Atheros QCA9558 (mini-PCIe), Qualcomm Atheros QCA9880-AR1A
Qualcomm Atheros QCA9563, Qualcomm Atheros QCA9880
Qualcomm Atheros QCA9558, Qualcomm Atheros QCA9880-AR1A Qualcomm Atheros QCA9558, Qualcomm Atheros QCA9880-BR4A Mentioned in tp-link's diff from V4 is 1 USB port (instead of 2)Ĭustom build with target support patch 2.4GHz only In late 2015 the v2 changed to flash chip GD25Q128, affected serial numbers start with 215C or higher. TP-Link support say “V2 has improved and DFS certified chipset. v2.0 printed on serial label on packaging. 2.x is based on Broadcom chips rather than Atheros and not supported yet (definitely no 802.11ac / 5 GHz)
0 kommentar(er)
